How to use waterslide transfer paper on polymer clay

Posted By Sonia Han on January 2023

Shape your polymer clay and bake it.
Trace around your baked polymer clay on the back of the transfer paper and cut around your design.
Fill a bowl with room temperature water. Submerge the transfer paper for 30-60 seconds or until the paper backing can slide easily. Remove from water.
Place transfer paper with backing flush against your polymer clay in the desired position.
Gently hold the edge of the decal while pulling the white backing from the transfer paper.
Using a wet finger, push out any excess water.
Air dry out of direct sunlight or bake for 15 minutes at 110°C.
OPTIONAL: Use a top coat of your choice or dome with resin.